Model Number: A2933
Anker Prime Wireless Car Charger (MagGo, AirCool, Pad)
Wired Speed, Wireless Freedom
Next-Level Speed
Equipped with the latest Qi2 25W module, Anker Prime wireless car charger delivers powerful 25W magnetic wireless charging that pushes your iPhone 17 to 50% in just 22 minutes.
Safe, Active Cooling
Charge faster without the heat. The Thermoelectric Cooling (TEC) system moves heat away from the charging surface to the back of the module, where a built-in fan disperses it—supporting safe, efficient performance.
Real-Time Monitoring
ActiveShield 5.0 performs 10 million temperature checks each day to keep charging safe.
Always Stable
Tested on eight rugged road conditions, the locking adjustable clamp and ultra‑strong magnetic hold keep your phone secure on any road.
Compatibility
iPhone 17 / 16 / 15 / 14 / 13 / 12 Series
And More
Notes:
1. Use a 45W or higher USB-C adapter for 25W charging and proper cooling.
2. The ambient light turns on for 30 seconds at power-on and remains on continuously during charging.
25W Ultra‑Fast Wireless Charging
Charge your iPhone 17 Pro to 50% in just 22 minutes—exceeding the limits of standard 25W wireless charging with TEC active cooling. Enjoy wired-level speed with the convenience of wireless, up to 6× faster than 5W wireless. While charging and in use, stays cool and stable—up to 4× faster than 5W wireless. Actual performance may vary.
Aerospace-Grade TEC Active Cooling
With TEC active cooling, your phone stays below 95°F while charging, providing a safer and more efficient experience. Lower temperatures help protect your battery and reduce long-term wear.
Adjust to the Perfect Angle
Switch between portrait and landscape modes with ease, and fine-tune your viewing angle with ±32° tilt. No more blocked views—just smooth, distraction‑free navigation.
Stays Put on Any Road
Combines an ultra-strong 13N magnetic force and a locking vent hook to keep your phone stable through bumps and turns. Tested on eight rough road conditions, your phone stays securely mounted without falling.
Compatibility
Not compatible with Tesla or Mercedes-Benz vehicles, or with cars that lack vent blades or use nonstandard vent designs, such as round air vents. Refer to the compatibility image to confirm if your car vent is supported. Compatible vent blade depths must be between 10 mm and 24 mm for optimal charging performance.
Installation Tips
The mount is non-detachable and only supports tail-hook installation.
What You Get
Anker Prime Wireless Car Charger (MagGo, AirCool, Pad), Anker Car Adapter (60W, 2 Ports), 3.3 ft USB-C to USB-C Cable, cord organizer, 2 cable holders, welcome guide, 24-month warranty, and our friendly customer service.
- Total Wattage: 25W
- Output: Phone25W Max
- Dimensions: 3.66 × 2.36 × 3.46 inches
- Specification Met: MPP(Qi2 25W)
How can I tell if this product is compatible with my car model?
This product supports grille-style air vents. Vent width, depth, and the gap between blades must meet the listed requirements. Not compatible with special vents such as Mercedes-Benz cylindrical, Tesla's long-slot, or Honda's honeycomb.
What phone models and cases are compatible with this product?
Made for iPhone 12 and later. iPhone 12 - 15 supports up to 15W; iPhone 16 and later up to 25W after software update (except iPhone 16e). For secure magnetic hold, use a MagSafe case or one no thicker than 2.5 mm; avoid non-magnetic cases.
Can I power it directly from the car's USB-C port or another cigarette lighter adapter?
This product requires a rated input power of 45W or higher. Use the included cigarette lighter adapter and cable to ensure safe and efficient charging.
How do I enable 25W charging, and what are the requirements?
Your setup must meet the following: 1. iPhone 16 series or later running iOS 26 or later (as required). 2. Powered by the original or a single-port 45W (or higher) car charger. 3. Either no case or an Apple MagSafe case no thicker than 2.5 mm.
What precautions and daily maintenance should I follow when using this product?
1. Do not touch the heat sink fins immediately after prolonged exposure to sunlight. 2. The adhesive backing of the cable organizer is single-use. 3. If the device becomes loose or shakes, tighten the knob to secure the installation.
Is it normal for the product to feel warm or hot?
Yes. It is normal for wireless chargers to get warm, especially during long use, like navigating or video streaming. The metal body helps release heat more quickly, so it might feel warmer. To avoid burns, do not touch the metal part of the product when the car is exposed to the sun for a long time.
How to Use Free Return Shipping After Purchasing Worry-Free Return & Delivery?
After you purchase or receive this service, once your return request is submitted and approved, we will provide you with a prepaid return shipping label. You don’t need to pay for the return shipping yourself. The label will be sent to you via email or made available on the Return Management page. Simply print it out, pack your item, and hand it over to the designated carrier. For detailed steps, please refer to: Guide to Using Free Return Shipping
- Choosing a selection results in a full page refresh.